Features: |
|
Designed for DJI Mavic 3 series |
Designed for drone enthusiasts, DJI Mavic 3 Series is perfect for holiday trips. Its long range allows its user to reach places that were earlier completely inaccessible, such as deep forests, canyons, lakes etc. With flight time of 46 minutes, Mavic 3 Series fits in well in every situation. The built-in camera allows recording videos in 4k. 4Hawks antenna for DJI Mavic model is highly advanced, operating in both 2.4GHz as well as 5GHz frequencies The concept behind the look of the antenna was to make it look like it was a part of the drone by default. Entire construction is 100% UV protected to assure longevity of the equipment. Additionally, part of the construction is made of aluminum to make the whole construction as light as possible. The entire set is lightweight and uniform (without any loose equipment pieces). Changing the direction of the antenna shouldn’t cause any difficulties, as the system was designed in a way that allows quick position change with just a single “click”. This way you can be sure that you do not lose the connection with your drone. |
Extender |
Noise |
Improved |
Adjustable |
High quality, |
Complete |
Specification |
Electrical & mechanical parameters of Raptor renge extender. |
Electrical parameters |
Frequencies |
Port 1: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz
|
Gain |
Port 1: 11 dBi (+/- 1 dBi) & 14 dBi (+/- 1 dBi)
|
VSWR |
Port 1: < 1.50 (max. < 2.00)
|
Beamwidth |
Port 1: 70°/40° & 40°/25°
|
Polarization |
Port 1: Vertical
|
Impedance |
Port 1: 50 Ω
|
Mechanical parameters |
Material |
Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, PTFE PCB
|
Weight |
~ 520g (450g Antenna + 70g Mounting) |
Dimensions |
29.2 x 18.2 x 2.1 cm
|
Connection |
Port 1: RP-SMA female
|
Tilt adjustment |
3 tilt positions, OnClick system |
Mounting type |
On SMA connectors (Permanent) |
In the box |
Accesories included to the Raptor range extender antenna. |
Range extender antenna | Stainless steel mounting kit | 2x 15-meter long, low reflection extension cables |
3D-printed antenna module top panel with SMA extension ports | 2x screwdriver (Torx T6 & Philips) + 8mm wrench | Additional Mavic tools |
Plots |
VSWR, Separation between connectors & characteristic patter of Raptor antennas. |
|
|
Nikt jeszcze nie napisał recenzji do tego produktu. Bądź pierwszy i napisz recenzję.
Tylko zarejestrowani klienci mogą pisać recenzje do produktów. Jeżeli posiadasz konto w naszej hurtowni zaloguj się na nie. Jeżeli nie, załóż bezpłatne konto i napisz recenzję.