Raptor SR dla DJI Phantom 4 Pro v2.0 [A115S] - antena zwiększająca zasięg - 4Hawks

Raptor SR dla DJI Phantom 4 Pro v2.0 [A115S] - antena zwiększająca zasięg - 4Hawks

Dostępność: Dostępny

Kod producenta: A115S

Kod EAN: 853854008292

Zapytaj o produkt Poleć znajomemu Specyfikacja PDF

Opis produktu
Recenzje produktu (0)

Features:

Concurrent dual band 2.4 & 5GHz
QuickAttach mounting system
Low loss PTFE antenna array
No modification to the drone itself
Long range extension without external boosters
Design does not contain any removable parts
Complete solution
Controller NOT included

Designed for DJI Phantom 4 Pro v2.0

Dji Phantom 4 Pro v2.0 is a improved version of Phantom 4 Pro. The basic kit allows for 33 minutes of uninterrupted flight.
With 4Hawks range extender antenna ability to work at 2 frequencies at the same time, Dji Phantom 4 Pro receives a great boost to its overall performance, by enhancing signal from oblique antenna signals that ignore noise exceptionally well - this in return allows Phantom 4 Pro to maximize its range in noisy areas. What’s more 4Hawks antenna also increases the range of Dji Phantom 4 Pro significantly, so the drone can reach even further than ever before.
4Hawks antenna for Dji Phantom 4 Pro model is operating in 2.4GHz with 8dBi gain as well as in 5GHz with 10 dBi gain. Both antenna frequencies allow simultaneous work. Entire construction is 100% UV protected to assure longevity of the equipment. Additionally, part of the construction is made of aluminum to make the whole construction as light as possible. Mounting is made of stainless steel for rock solid stability. Mounting the range extender is easy and doesn’t require professional assistance. The entire set is lightweight and uniform (without any loose equipment pieces). Changing the direction of the antenna shouldn’t cause any difficulties, as the system was designed in a way that allows quick position change with just a single “click” to 5 different positions. This way you can be sure that you do not lose the connection with your drone.


Extender Flight Range	Noise removal from other devices	Improved video signal	Adjustable signal direction	High quality, lightweight design	Complete solution

alt

Specification

Electrical & mechanical parameters of Raptor renge extender.

Electrical parameters

Frequencies

Port 1: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz
Port 2: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz

Gain

Port 1: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)
Port 2: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)

VSWR

Port 1: < 1.50 (max. < 2.15)
Port 2: < 1.50 (max. < 2.15)

Beamwidth

Port 1: 90°/65° & 55°/55°
Port 2: 90°/65° & 55°/55°

Polarization

Port 1: Vertical
Port 2: Vertical

Impedance

Port 1: 50 Ω
Port 2: 50 Ω

Mechanical parameters

Material

Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, PTFE PCB
Mounting: Stainless steel + paint

Weight

~ 200g (110g Antenna + 90g Mounting)

Dimensions

16.1 x 9.1 x 1.7 cm
6.34 x 3.60 x 0.67 inch

Connection

Port 1: RP-SMA female
Port 2: RP-SMA female

Tilt adjustment

5 tilt positions, OnClick system

Mounting type

QuickAttach

alt

In the box

Accesories included to the Raptor range extender antenna.


Range extender antenna	Stainless steel mounting kit	2x RP-SMA male RG316 white pigtails


2x Dedicated for Phantom 4 Pro v2.0 UFL pigtails	screwdriver (Philips) + 8mm wrench + hex 1,5mm

alt

Plots

VSWR, Separation between connectors & characteristic patter of Raptor antennas.

alt

Tutorials

Video tutorial with modification of the controller.

alt

Nikt jeszcze nie napisał recenzji do tego produktu. Bądź pierwszy i napisz recenzję.

Tylko zarejestrowani klienci mogą pisać recenzje do produktów. Jeżeli posiadasz konto w naszej hurtowni zaloguj się na nie. Jeżeli nie, załóż bezpłatne konto i napisz recenzję.

Pozostałe produkty z kategorii

Nowości(162)

Produkty Promocyjne(36)

Polecane Produkty(1)

Nasze Hity(4)

Raptor SR dla DJI Phantom 4 Pro v2.0 [A115S] - antena zwiększająca zasięg - 4Hawks

Features:

Specification

Electrical parameters

Port 1: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz
Port 2: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz

Port 1: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)
Port 2: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)

Port 1: < 1.50 (max. < 2.15)
Port 2: < 1.50 (max. < 2.15)

Port 1: 90°/65° & 55°/55°
Port 2: 90°/65° & 55°/55°

Port 1: Vertical
Port 2: Vertical

Port 1: 50 Ω
Port 2: 50 Ω

Mechanical parameters

Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, PTFE PCB
Mounting: Stainless steel + paint

~ 200g (110g Antenna + 90g Mounting)

16.1 x 9.1 x 1.7 cm
6.34 x 3.60 x 0.67 inch

Port 1: RP-SMA female
Port 2: RP-SMA female

5 tilt positions, OnClick system

QuickAttach

In the box

Plots

Tutorials

Raptor XR dla DJI RC PRO Controller z kablami o długości 20m (x4 szt.) [A140X-20M] - antena zwiększająca zasięg - 4Hawks

Raptor XR dla DJI Matrice (+Raptor Link) [A113X] - antena zwiększająca zasięg - 4Hawks

Raptor XR dla Autel X-star Premium [A110X] - antena zwiększająca zasięg - 4Hawks

Raptor XR dla DJI RC PRO Controller z kablami o długości 2m (x4 szt.) [A140X-2M] - antena zwiększająca zasięg - 4Hawks

Raptor SR dla DJI Mavic Mini (Wersja US, tylko 5.8GHz) [A118S] - antena zwiększająca zasięg - 4Hawks

Raptor SR dla DJI Phantom 4 Pro v2.0 [A115S] - antena zwiększająca zasięg - 4Hawks

Features:

Specification

Electrical parameters

Port 1: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz Port 2: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz

Port 1: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi) Port 2: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)

Port 1: < 1.50 (max. < 2.15) Port 2: < 1.50 (max. < 2.15)

Port 1: 90°/65° & 55°/55° Port 2: 90°/65° & 55°/55°

Port 1: Vertical Port 2: Vertical

Port 1: 50 Ω Port 2: 50 Ω

Mechanical parameters

Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, PTFE PCB Mounting: Stainless steel + paint

~ 200g (110g Antenna + 90g Mounting)

16.1 x 9.1 x 1.7 cm 6.34 x 3.60 x 0.67 inch

Port 1: RP-SMA female Port 2: RP-SMA female

5 tilt positions, OnClick system

QuickAttach

In the box

Plots

Tutorials

Port 1: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz
Port 2: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz

Port 1: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)
Port 2: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)

Port 1: < 1.50 (max. < 2.15)
Port 2: < 1.50 (max. < 2.15)

Port 1: 90°/65° & 55°/55°
Port 2: 90°/65° & 55°/55°

Port 1: Vertical
Port 2: Vertical

Port 1: 50 Ω
Port 2: 50 Ω

Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, PTFE PCB
Mounting: Stainless steel + paint

16.1 x 9.1 x 1.7 cm
6.34 x 3.60 x 0.67 inch

Port 1: RP-SMA female
Port 2: RP-SMA female