Raptor XR dla DJI Inspire 1 Series (+Raptor Link) [A125X] - antena zwiększająca zasięg - 4Hawks

Raptor XR dla DJI Inspire 1 Series (+Raptor Link) [A125X] - antena zwiększająca zasięg - 4Hawks

Dostępność: Dostępny

Kod producenta: A125X

Kod EAN: 853854008636

Zapytaj o produkt Poleć znajomemu Specyfikacja PDF

Opis produktu
Recenzje produktu (0)

Features:

Maximize performance
QuickAttach mounting system
Adjustable tilt of the range extender
Dedicated pigtails
No drilling required
No modification to the drone itself
Long range extension without external boosters
Design does not contain any removable parts
Complete solution
Controller NOT included

Designed for DJI Inspire 1 +Raptor Link

Dji Inspire 1 is a high quality drone. The basic kit allows for up to 30 minutes of uninterrupted flight, maximum speed of 60km/h. Drone is targeted for professional movie makers.
4Hawks antenna for Dji Inspire 1 model is operating in 2.4GHz with 14dBi gain with additional antenna installed inside controller working in 5GHz frequency that allows operating the drone with 2 controllers.
Entire construction is 100% UV protected to assure longevity of the equipment. Additionally, part of the construction is made of aluminum to make the whole construction as light as possible. Mounting is made of stainless steel for rock solid stability.
Mounting the range extender is easy and doesn’t require professional assistance. The entire set is lightweight and uniform (without any loose equipment pieces). Changing the direction of the antenna shouldn’t cause any difficulties, as the system was designed in a way that allows quick position change with just a single “click” to 5 different positions. This way you can be sure that you do not lose the connection with your drone.


Extender Flight Range	Noise removal from other devices	Improved video signal	Adjustable signal direction	High quality, lightweight design	Complete solution

alt

Specification

Electrical & mechanical parameters of Raptor renge extender.

Electrical parameters

Frequencies

Port 1: 2.40 - 2.50 GHz
Port 2: 2.40 - 2.50 GHz

Gain

Port 1: 14 dBi (+/- 1 dBi)
Port 2: 14 dBi (+/- 1 dBi)

VSWR

Port 1: < 1.20 (max. < 1.40)
Port 2: < 1.20 (max. < 1.40)

Beamwidth

Port 1: 35°/45°
Port 1: 35°/45°

Polarization

Port 1: Vertical
Port 2: Vertical

Impedance

Port 1: 50 Ω
Port 2: 50 Ω

Mechanical parameters

Material

Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, PTFE PCB
Mounting: Stainless steel + paint

Weight

~ 540g (450g Antenna + 90g Mounting)

Dimensions

29.2 x 18.2 x 2.1 cm
11.50 x 7.16 x 0.83 inch

Connection

Port 1: RP-SMA female
Port 2: RP-SMA female

Tilt adjustment

5 tilt positions, OnClick syste

Mounting type

On SMA connectors (Permanent)

alt

In the box

Accesories included to the Raptor range extender antenna.


Range extender antenna	Stainless steel mounting kit	2x RP-SMA male RG316 white pigtails


2x Dedicated for Phantom MMCX pigtails	Screwdriver (Philips) + 8mm wrench + hex 1.5mm

alt

Plots

VSWR, Separation between connectors & characteristic patter of Raptor antennas.

alt

Tutorials

Video tutorial with modification of the controller.

alt

Strona WWW producenta:

www.4hawks.com

Dane kontaktowe producenta:

4Hawks, Polna 1, 52-116 Iwiny, Polska, e-mail: office@4hawks.com, telefon: +577667761

Nikt jeszcze nie napisał recenzji do tego produktu. Bądź pierwszy i napisz recenzję.

Tylko zarejestrowani klienci mogą pisać recenzje do produktów. Jeżeli posiadasz konto w naszej hurtowni zaloguj się na nie. Jeżeli nie, załóż bezpłatne konto i napisz recenzję.

Pozostałe produkty z kategorii

Nowości(101)

Produkty Promocyjne(56)

Polecane Produkty(1)

Nasze Hity(4)

Raptor XR dla DJI Inspire 1 Series (+Raptor Link) [A125X] - antena zwiększająca zasięg - 4Hawks

Features:

Specification

Electrical parameters

Port 1: 2.40 - 2.50 GHz
Port 2: 2.40 - 2.50 GHz

Port 1: 14 dBi (+/- 1 dBi)
Port 2: 14 dBi (+/- 1 dBi)

Port 1: < 1.20 (max. < 1.40)
Port 2: < 1.20 (max. < 1.40)

Port 1: 35°/45°
Port 1: 35°/45°

Port 1: Vertical
Port 2: Vertical

Port 1: 50 Ω
Port 2: 50 Ω

Mechanical parameters

Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, PTFE PCB
Mounting: Stainless steel + paint

~ 540g (450g Antenna + 90g Mounting)

29.2 x 18.2 x 2.1 cm
11.50 x 7.16 x 0.83 inch

Port 1: RP-SMA female
Port 2: RP-SMA female

5 tilt positions, OnClick syste

On SMA connectors (Permanent)

In the box

Plots

Tutorials

Strona WWW producenta:

Dane kontaktowe producenta:

Raptor XR dla DJI RC PRO Controller z kablami o długości 15m (x4 szt.) [A140X-15M] - antena zwiększająca zasięg - 4Hawks

Raptor XR dla DJI Mavic Mini (Wersja US, tylko 5.8GHz [A118X] - antena zwiększająca zasięg - 4Hawks

Raptor XR dla Autel Evo II v2 [A132X] - antena zwiększająca zasięg - 4Hawks

Raptor SR dla 3DR Solo [A111S] - antena zwiększająca zasięg - 4Hawks

Raptor XR dla DJI Phantom 4 / DJI Phantom 4 Advance [A102X] - antena zwiększająca zasięg - 4Hawks

Raptor XR dla DJI Inspire 1 Series (+Raptor Link) [A125X] - antena zwiększająca zasięg - 4Hawks

Features:

Specification

Electrical parameters

Port 1: 2.40 - 2.50 GHz Port 2: 2.40 - 2.50 GHz

Port 1: 14 dBi (+/- 1 dBi) Port 2: 14 dBi (+/- 1 dBi)

Port 1: < 1.20 (max. < 1.40) Port 2: < 1.20 (max. < 1.40)

Port 1: 35°/45° Port 1: 35°/45°

Port 1: Vertical Port 2: Vertical

Port 1: 50 Ω Port 2: 50 Ω

Mechanical parameters

Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, PTFE PCB Mounting: Stainless steel + paint

~ 540g (450g Antenna + 90g Mounting)

29.2 x 18.2 x 2.1 cm 11.50 x 7.16 x 0.83 inch

Port 1: RP-SMA female Port 2: RP-SMA female

5 tilt positions, OnClick syste

On SMA connectors (Permanent)

In the box

Plots

Tutorials

Strona WWW producenta:

Dane kontaktowe producenta:

Port 1: 2.40 - 2.50 GHz
Port 2: 2.40 - 2.50 GHz

Port 1: 14 dBi (+/- 1 dBi)
Port 2: 14 dBi (+/- 1 dBi)

Port 1: < 1.20 (max. < 1.40)
Port 2: < 1.20 (max. < 1.40)

Port 1: 35°/45°
Port 1: 35°/45°

Port 1: Vertical
Port 2: Vertical

Port 1: 50 Ω
Port 2: 50 Ω

Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, PTFE PCB
Mounting: Stainless steel + paint

29.2 x 18.2 x 2.1 cm
11.50 x 7.16 x 0.83 inch

Port 1: RP-SMA female
Port 2: RP-SMA female