Raptor SR dla DJI Mavic 3 series [A133S] - antena zwiększająca zasięg - 4Hawks

Raptor SR dla DJI Mavic 3 series [A133S] - antena zwiększająca zasięg - 4Hawks

Dostępność: Dostępny

Kod producenta: A133S

Kod EAN: 853854008759

Zapytaj o produkt Poleć znajomemu Specyfikacja PDF

Opis produktu
Recenzje produktu (0)

Features:

Concurrent dual band 2.4 & 5GHz
No modification to the drone itself
Long range extension without external boosters
Design does not contain any removable parts
Complete solution
Controller NOT included

Designed for DJI Mavic 3 Series

Designed for drone enthusiasts, DJI Mavic 3 Series is perfect for holiday trips. Its long range allows its user to reach places that were earlier completely inaccessible, such as deep forests, canyons, lakes etc. With flight time of 46 minutes, Mavic 3 Series fits in well in every situation. The built-in camera allows recording videos in 4k. 4Hawks antenna for DJI Mavic model is highly advanced, operating in both 2.4GHz as well as 5GHz frequencies The concept behind the look of the antenna was to make it look like it was a part of the drone by default. Entire construction is 100% UV protected to assure longevity of the equipment. Additionally, part of the construction is made of aluminum to make the whole construction as light as possible. The entire set is lightweight and uniform (without any loose equipment pieces). Changing the direction of the antenna shouldn’t cause any difficulties, as the system was designed in a way that allows quick position change with just a single “click”. This way you can be sure that you do not lose the connection with your drone.


Extender Flight Range	Noise removal from other devices	Improved video signal	Adjustable signal direction	High quality, lightweight design	Complete solution

alt

Specification

Electrical & mechanical parameters of Raptor renge extender.

Electrical parameters

Frequencies

Port 1: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz
Port 2: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz

Gain

Port 1: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)
Port 2: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)

VSWR

Port 1: < 1.50 (max. < 2.15)
Port 2: < 1.50 (max. < 2.15)

Beamwidth

Port 1: 90°/65° & 55°/55°
Port 2: 90°/65° & 55°/55°

Polarization

Port 1: Vertical
Port 2: Vertical

Impedance

Port 1: 50 Ω
Port 2: 50 Ω

Mechanical parameters

Material

Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, FR4 PCB
Mounting: Stainless steel + paint

Weight

~ 180g (110g Antenna + 70g Mounting)

Dimensions

16.1 x 9.1 x 1.7 cm
6.34 x 3.60 x 0.67 inch

Connection

Port 1: RP-SMA female
Port 2: RP-SMA female

Tilt adjustment

3 tilt positions, OnClick system

Mounting type

On SMA connectors (Permanent)

alt

Plots

VSWR, Separation between connectors & characteristic patter of Raptor antennas.

alt

Tutorials

Video tutorial with modification of the controller.

alt

Nikt jeszcze nie napisał recenzji do tego produktu. Bądź pierwszy i napisz recenzję.

Tylko zarejestrowani klienci mogą pisać recenzje do produktów. Jeżeli posiadasz konto w naszej hurtowni zaloguj się na nie. Jeżeli nie, załóż bezpłatne konto i napisz recenzję.

Pozostałe produkty z kategorii

Nowości(162)

Produkty Promocyjne(36)

Polecane Produkty(1)

Nasze Hity(4)

Raptor SR dla DJI Mavic 3 series [A133S] - antena zwiększająca zasięg - 4Hawks

Features:

Specification

Electrical parameters

Port 1: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz
Port 2: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz

Port 1: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)
Port 2: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)

Port 1: < 1.50 (max. < 2.15)
Port 2: < 1.50 (max. < 2.15)

Port 1: 90°/65° & 55°/55°
Port 2: 90°/65° & 55°/55°

Port 1: Vertical
Port 2: Vertical

Port 1: 50 Ω
Port 2: 50 Ω

Mechanical parameters

Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, FR4 PCB
Mounting: Stainless steel + paint

~ 180g (110g Antenna + 70g Mounting)

16.1 x 9.1 x 1.7 cm
6.34 x 3.60 x 0.67 inch

Port 1: RP-SMA female
Port 2: RP-SMA female

3 tilt positions, OnClick system

On SMA connectors (Permanent)

Plots

Tutorials

4H Raptor XR dla DJI Mavic 3 series z kablami o długości 2m [A133X-2M] - antena zwiększająca zasięg - 4Hawks

Raptor XR dla DJI Inspire 1 Series (+Raptor Link) [A125X] - antena zwiększająca zasięg - 4Hawks

Raptor SR dla DJI RC Controller [A138S] - antena zwiększająca zasięg - 4Hawks

Raptor SR dla DJI Cendence [A117S] - antena zwiększająca zasięg - 4Hawks

Raptor XR dla Autel Smart Controller v2 [A137X] - antena zwiększająca zasięg - 4Hawks

Raptor SR dla DJI Mavic 3 series [A133S] - antena zwiększająca zasięg - 4Hawks

Features:

Specification

Electrical parameters

Port 1: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz Port 2: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz

Port 1: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi) Port 2: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)

Port 1: < 1.50 (max. < 2.15) Port 2: < 1.50 (max. < 2.15)

Port 1: 90°/65° & 55°/55° Port 2: 90°/65° & 55°/55°

Port 1: Vertical Port 2: Vertical

Port 1: 50 Ω Port 2: 50 Ω

Mechanical parameters

Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, FR4 PCB Mounting: Stainless steel + paint

~ 180g (110g Antenna + 70g Mounting)

16.1 x 9.1 x 1.7 cm 6.34 x 3.60 x 0.67 inch

Port 1: RP-SMA female Port 2: RP-SMA female

3 tilt positions, OnClick system

On SMA connectors (Permanent)

Plots

Tutorials

Port 1: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz
Port 2: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz

Port 1: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)
Port 2: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)

Port 1: < 1.50 (max. < 2.15)
Port 2: < 1.50 (max. < 2.15)

Port 1: 90°/65° & 55°/55°
Port 2: 90°/65° & 55°/55°

Port 1: Vertical
Port 2: Vertical

Port 1: 50 Ω
Port 2: 50 Ω

Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, FR4 PCB
Mounting: Stainless steel + paint

16.1 x 9.1 x 1.7 cm
6.34 x 3.60 x 0.67 inch

Port 1: RP-SMA female
Port 2: RP-SMA female